Heavy duty powered lift tables to transport and elevate your heaviest loads. A heavy duty 12V DC powered unit with deep cycle battery and an on-board battery charger is standard, a battery charge indicator is optional. Features 8" phenolic casters (2 swivel and 2 rigid), floor lock, and patented electric pinch point guards. A hand held pendant control with an 8 foot coil cord and mounting brackets are available separately. Minimum frame width is 34". Add 25" to platform length for the overall length.

Standard Safety Features:

• Meets OSHA requirements
• Electric pinch point guards
• Upward travel limit switch
• Lock in place safety maintenance support
• Emergency stop if hose breaks

Standard Specifications:

• Heavy duty 12V power unit provides maximum torque for faster lift speeds and minimum amp draw.
• Heavy duty deep cell battery allows maximum use between charges
• Cast iron pump with integral valving including pressure relief valve, check valve, down solenoid valve, and pressure compensation flow control valve.
• NEMA-4 pendant hand control has 8' coil cord
• Protective battery cover
• Displacement style hydraulic actuator - rod end installed down
• Hydraulic actuators have internal brass velocity fuse w/ stainless steel spring
• Phenolic Casters are 8" x 2", 2 rigid and 2 swivel
• Foot actuated floor lock is standard
• Conveniently located air bleed screw on hydraulic actuators
• Replaceable deck, main axle pins and bearings
• Rollers - Cold finished steel with case carburizing to .010 inch with Rockwell "C" 40
• Pins - Cold rolled and finished to bearing manufacturer's specifications
• Bearings - Self-lubricating with compressive strength of 44,000 psi
• Swaged on high pressure hose fittings, Pump intake/return hose is 1/2"
• Welding to meet A.W.S.

Vertical Travel: 36"

Capacity: 1,000 lbs.

Raised Height: 46"

Lowered Height: 10"

Travel Time: 9 sec.

Net Weight: 1408 lbs.